Address: No. 2, Xia Shicun Industrial Zone, Jianggao Town, Baiyun District, Guangzhou Contact: Liu Jinwen Mobile: 13502414866
Landline: 020-82304157
E-mail: 562827813@qq.com
Contact: Hu Hairan Mobile: 18620004568
Terrazzo floor curing and terrazzo floor polishing
The terrazzo floor can be freely designed with a choice of background color and aggregate type.
Custom colors, independent design, each terrazzo floor is the exclusive business card for the building.
The terrazzo construction procedure should be carried out in order from the top to the bottom. In the same floor, first make a flat top, wall flour brush, then make a terrazzo surface layer and a footboard to avoid leakage of the grinding stone, affecting the next layer of flat top and wall decoration, while avoiding the scaffolding damage to the surface layer, otherwise There must be effective measures to prevent floor water seepage and to protect the surface.
When constructing a terrazzo floor, customers are often required to pay special attention to terrazzo floor polishing.
So how should the terrazzo be polished? The following is a small piece of Jincheng Floor Xiaobian to share the polishing and polishing of terrazzo floor. We must pay attention to it.
1 terrazzo floor polishing
The first step is to polish the ground. When grinding, water was sequentially ground using 50#, 150# and 300# water mill discs. After grinding the ground, use a water suction machine to draw in the groundwater.
In order to make the corners have the same light effect, first use the angle grinder to polish the corners, then carry out the grinding and the corners together, so that the corners will not leave dirt and absorb the dirt and react at the same time, so the ground it There will be a large area with the same effect.
Tip: When the area is large, push the material water directly into the ground without polishing. This saves time and saves water.
2 terrazzo floor curing
Curing terrazzo on the ground is the best solution for extending floor life and improving floor performance.
Tip: When curing the floor, be sure to dry the floor, sprinkle with a curing agent, and require the floor to remain wet for at least 4 hours.
3 terrazzo ground fine grinding
After the curing agent is dried, it needs to be ground again, and then the water is ground using a 500#, 1000#, 2000# and 3000# water mill disc. After grinding, the surface water is discharged by the suction machine.
Tips: When polishing 3000 mesh, be sure to polish with water, which will help to further clean the floor.
4 crystal polishing
After the floor is dry, it can be polished with white or red scouring pad and terrazzo permeate. After drying, the steel wool is wound on a scouring pad, ground and crystallized, and polished until the floor is dry. brightness.
Tip: The terrazzo floor is easy to polish and polish, so the terrazzo floor will be brighter and the quality will be better.
With the grinding and polishing skills of the terrazzo floor, you can easily create a more polished and durable terrazzo floor.
Terrazzo floor curing and terrazzo floor polishing
The terrazzo floor can be freely designed with a choice of background color and aggregate type.
Custom colors, independent design, each terrazzo floor is the exclusive business card for the building.
Previous: Emery wear-resistant floor material
下一条: Terrazzo
Address:Tanbu Chatang Industrial Zone, Huadu District, Guangzhou TelePhone:020-82304157 MobilePhone:13502414866 E-mail:562827813@qq.com