<a href=">Mail:
Product display
Engineering case
You are here: Home > Engineering case > Content
Inorganic terrazzo renovation
Edit:Guangdong Meifule New Material Technology Co., Ltd.   PublicDate:2018-11-08

Terrazzo renovation

After a certain period of use, the terrazzo floor will have some problems, such as sanding, dusting, falling powder, etc. Then we have to do the terrazzo renovation, and now the most commonly used is the hardening of the terrazzo.

First, after the terrazzo renovation process features:

1, the hardness will reach 9, which is almost increased by 45.3%. The hardness is increased, the compactness is naturally increased, and the wear resistance is better.

2. After the terrazzo renovation process, it also played a lot of role in dust prevention, and the ground no longer has dust.

3. After the terrazzo renovation process, the ground is bright but not slippery

4. There is also a great improvement in compression resistance, which is quite different from the terrazzo floor which has not been treated with a curing agent, and is more than 3 times stronger than the untreated terrazzo floor.

5, the curing agent can effectively play a weathering effect, which can greatly extend the service life of the terrazzo floor.

6. After the terrazzo renovation process, marble-like luster may appear on the gloss. The longer the gloss, the better the gloss and the more permanent light.

Second, the working principle of inorganic terrazzo floor renovation:

The terrazzo floor refurbishment is to match the grinding pieces (blocks) of different numbers, coarse, fine and fine grinding of the terrazzo, sealing the micro-holes, strengthening the internal structure, and then using concrete reinforcement to penetrate into the concrete on the surface of the terrazzo. Produces a compounding reaction to form a dense crystal protective layer that is hard to wear, high in brightness, water and stain resistant, and easy to clean and maintain. At the same time, the surface of the terrazzo produces a high-gloss mirror effect. After refurbishing and crystallization, the terrazzo has gloss, hardness, antifouling properties and water absorption comparable to marble.

Third, the inorganic terrazzo grinding renovation and crystallization process:

1. Use heavy-duty stone turning equipment with alloy grinding wheels (optional), resin grinding blocks, or horseshoe-shaped grinding blocks to sequence old, contaminated, diseased terrazzo or newly poured terrazzo floors in the order from coarse grinding to fine grinding. Polished and polished to achieve the desired smoothness.

2. The special penetrating agent of the water grindstone is matched with the stone crystal surface machine to make the surface of the terrazzo crystal harden and brighten to improve the brightness and wear resistance of the terrazzo, and then use the surface agent to carry out the surface crystal surface maintenance.

3, depending on the size of the ground flow of people to do local maintenance or quarterly maintenance, you can maintain a good mirror effect for a long time, this way can save costs, easy to operate.

4. The inorganic terrazzo ground after grinding and refurbishing has the following four properties:

1. Increased hardness: the surface after treatment, no dust, abrasion and scratch resistance, prolong the service life of the ground.

2, mirror effect: the surface of the inorganic terrazzo can reach the same luster of natural stone, and the finish is high. The luminosity can reach 105 degrees or more.

3, good anti-fouling: corrosion resistance, oil, water, anti-seepage, anti-fouling, water absorption is less than 0.5%.

4, easy maintenance: daily cleaning, maintenance is easy, greatly reducing the cost of cleaning and maintenance in the later period, daily use only dust push with electrostatic vacuum dust. Regular neutral detergent cleaning and stone care solution polishing.

Address:Tanbu Chatang Industrial Zone, Huadu District, Guangzhou  TelePhone:  MobilePhone:  E-mail:


二维码 扫一扫